As a kind of safety rope, aramid cable can protect our lives at a crucial moment. Aramid cables can be used in many situations. For example, firefighters use aramid ropes for firefighting, and aramid ropes for trailers when cars need to be anchored on the road. He has high strength and is not easy to break. What kind of protective measures are required for such a safety rope?

   The safety rope is an important prop for life safety protection. Good preservation is the fundamental of safe use. The following are some precautions when storing the safety rope:

1, to avoid safety rope contact with chemicals. The rescue rope should be stored in a place protected from light, cool and chemical-free. Use a special rope bag to store the safety rope.

2. Those who have reached one of the following conditions must have their safety ropes decommissioned: a large area of the outer layer (wear-resistant layer) is damaged or exposed; a continuous use (participation in rescue missions) is performed 300 times or more; the outer layer ( Wear-resistant layer) is stained with oily and flammable chemicals residues that have not been washed for a long time, affecting the performance; the inner layer (force layer) is seriously damaged and cannot be repaired; serviced for more than 5 years. In particular, it is worth noting that when doing rapid descent, do not use slings without metal rings. The heat generated by the safety ropes and O-rings will be directly transmitted to the non-metallic slings of the slings due to a rapid decline. Overheating may result. The hanging point is broken and is very dangerous (in general, nylon is used for the sling and nylon has a melting point of 248 degrees Celsius).

3. Perform an appearance inspection once a week. Check the contents include: whether there is scratches or serious wear, whether it is corroded by chemical substances, whether it has faded, whether it is thicker, thinner, softer, harder, and whether the rope bag appears. Serious damage, etc.

4. After each use of the safety rope, the outer layer (wear-resistant layer) of the safety rope should be carefully inspected for scratches or severe wear, whether it is corroded, thickened, thinned, softened, hardened, or sheathed by chemical substances. Serious damage, etc. (The physical deformation of the safety rope can be checked by hand.) If this happens, stop using the safety rope immediately.

5. It is forbidden to pull the safety rope on the ground and not to step on the safety rope. Dragging and stepping on the safety rope will grind the surface of the safety rope and cause the safety rope to wear faster.

6. It is forbidden to scrape and cut safety ropes with sharp edges. Any part of the load-bearing safety rope is prone to wear when it comes in contact with any shape of corner, and it may cause breakage of the safety rope. Therefore, when using a safety rope in a place where there is a risk of friction, the safety rope must be protected with a safety rope pad, a corner guard wheel, and the like.

7. Promote the use of special washing equipment when cleaning. Use neutral detergent. Rinse with clean water. Place in a cool and dry place. Do not expose to sunlight.

8.Before use, safety ropes should also be checked for hooks, pulleys, slow-down 8-rings and other metal equipment for burrs, cracks, deformations, etc. to avoid injury to the safety ropes.

    The daily maintenance of aramid cable is very important, because we do not know what will happen when using aramid cable. If it is not maintained, it will wear out, it will definitely reduce the life of aramid cable! Binzhou Hengfeng Chemical Fiber Co., Ltd. specializes in the production of three-strand ropes, eight-strand ropes and twelve-strand ropes, aramid ropes, high-performance electric traction ropes, and maritime marine double-wire ropes.